TS Brush Cutter · Electric remote-control brush cutter
TS-BC1000-40
Overview
A 38.16 kWh LiFePO4 battery, 1,000 mm cutting width and 9 kW water-cooled cutting motor for clearing overgrown land. Compare its 988 kg weight and 2,170 × 1,270 × 840 mm dimensions with your transport and site access. Images show TS-BC1000-30 for reference.
US$9910 / unit
FOB Qingdao · 20-ft container: 8 units · 40-ft container: 20 units
Request a quoteBattery energy / kWh
38.16
Operating time
Approx. 7 hours
Cutting width / mm
1000
Remote range / m
200
Operating time varies with vegetation, terrain and load.
Working system
Battery, cutting head
and tracked drive
Battery power drives travel and cutting. Match the configuration to your vegetation, ground conditions, site access and charging arrangements.
01
Cutting system
A 1,000 mm cutting width, 9 kW water-cooled motor and 24 cutting tools form the cutting system. The head has a stated lift range of 0–320 mm. Match the cutting configuration and travel speed to vegetation and ground conditions.
Cutting motor / kW
9
02
Tracked chassis
Two 4 kW travel motors drive the tracks. Maximum climbing angle: 55°. Maximum operating angle: 45°. These are distinct limits. Suitability also depends on ground conditions, traction and travel direction. Overall dimensions are 2,170 × 1,270 × 840 mm; machine weight is 988 kg.
Maximum operating angle / °
45
03
Remote operation
Remote control has a stated range of 200 m and a stated response time of 50 ms. Closed-loop speed correction is specified. Keep the machine and work area in view and select the speed to suit the task.
Nominal remote range / m
200
Cutting head
1000 mm cutting width
A 1,000 mm cutting width, 9 kW water-cooled motor and 24 cutting tools form the cutting system. The head has a stated lift range of 0–320 mm. Match the cutting configuration and travel speed to vegetation and ground conditions.
Technical specifications
Dimensions &
specifications
Length / mm
2170
Width / mm
1270
Height / mm
840
Slope suitability depends on surface traction, direction of travel and operating conditions. Follow the instructions for the supplied machine.
Battery & charging
Battery type
LiFePO4
Energy / kWh
38.16
Capacity / Ah
530
System voltage / V
72
Operating time
Approx. 7 hours
Charging time
Approx. 6–12 hours, depending on charging configuration
Operating time varies with working conditions. Charging time depends on the charger configuration.
Cutting system
Cutting width / mm
1000
Cutting motor / kW
9
Max. blade speed / rpm
3450
Hydraulic lift range
0–320 mm
Chassis & terrain
Length / mm
2170
Width / mm
1270
Height / mm
840
Net weight / kg
988
Travel speed / m/s
1
Max. climbing angle / °
55
Max. operating angle / °
45
Maximum climbing angle and maximum operating angle are different limits. Site suitability depends on the surface and operating conditions.
Remote control
Remote range / m
200
Listed response time / ms
50
Closed-loop speed control
Standard
Speed modes
Low / high selectable
Remote operation is controlled by the operator. Keep the machine in view and follow the model-specific operating instructions.
Choose your configuration
Compare models
Compare the model specifications, then confirm the configuration for your vegetation, ground conditions and charging arrangements.
Model
Battery / kWh
Cutting width / mm
Operating time
USD / unit
Battery / kWh
16.56
Cutting width / mm
1000
Operating time
Approx. 4–6 hours
USD / unit
5773
Battery / kWh
30.24
Cutting width / mm
1000
Operating time
Approx. 8 hours
USD / unit
7737
Battery / kWh
30.24
Cutting width / mm
1000
Operating time
Approx. 5–7 hours
USD / unit
8749
Battery / kWh
38.16
Cutting width / mm
1000
Operating time
Approx. 7 hours
USD / unit
9910
Operating-time figures refer to each model specification. They are not a controlled, same-condition runtime comparison.
Model documents
Operating instructions
Request a mower quote
Tell us which model you are considering, where it will work and how many machines you need. Site photos are useful if you are still choosing.